Starrett Punch

The obvious disadvantage of brass punches is the same as their advantage -they are much softer than hardened steel. Obviously, the brass is less able to stand up to years of hard use. Ideally, it is good to have sets of both types and use the brass punches only when there is the possibility of damage to the work piece.

• Also includes diameter of punch 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
• Comes with fabric pouch

Specially selected tool steel is hardened and tempered to the proper hardness. Knurled finger grips for ease of handling. A special tempering process makes the head less likely to fracture from a hard, off-center blow.

• Have a knurled finger grip
• Each punch as the size stamped on the head
• Protective Vinyl Case

Spring tension, which regulates the blow, is constant so marks made by the point are uniform in depth and size for each setting.

• Internal mechanism automatically strikes a blow when downward pressure is applied
• Adjustable knurled cap regulates the force of the blow
• Rugged automatic punches with all-steel handles and parts
• All sizes are identical in style, differing only in the striking power
• The point can be easily removed for regrinding or replacement

Chisels & Punches Tool Type: Center Fractional Punch Size: 5/8 Overall Length: 5 Material: Steel

• All working parts are made of tool steel
• Point may be easily removed for resharpening or replacement
• Knurled aluminum handle for a positive grip
• Force of the blow can be adjusted by turning the knurled cap
• Strikes a perfect center mark every time

Starrett Number 565 Drive Pin Punches are well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. Includes all 8 sizes in a plastic box.

• 8 Sizes - 1/16-Inch, 3/32-Inch, 1/8-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch
• 4-Inch long
• Each punch has the size stamped on the head
• Hardened, tempered, nicely finished with a knurled finger grip
• Round plastic box

These center punch have a square knurled grip and will not roll when laid down. They are hardened and properly tempered. The tips are accurately centered and ground at the proper angle to give maximum service.

Extra-long. Well proportioned, hardened, properly tempered, and have a knurled grip. For following long cotter pins and the like into holes with out hindrance.

• Set of 5 punches includes: 1/8", 3/16", 1/4", 5/16", 3/8"
• Extra long, measuring 8"
• Well proportioned, hardened and properly tempered
• Have a knurled finger grip

Ideal for use on materials that may be damaged by hardened, tempered steel punches.

• Knurled Grip for secure holding
• Will not damage softer materials
• Non-sparking
• Punch diameter clearly marked on the head

Tension of regulating spring is constant, so marks made by point are uniform in depth and size for each setting. Easily removable point. No hammer required, mechanism automatically strikes a blow when downward pressure is applied...

• Adjustable Stroke
• Steel is hardened and tempered
• Knurled finger grips for ease of handling

Each Starrett 565-series drive pin punch has the size stamped on the head. Each punch is 4 inches long.

• Well proportioned
• Hardened
• Nicely finished
• Knurled finger grip
• Properly tempered